This two cavity Zip Lead Mould two x 2.5oz Zip Leads at a time. Easy to use and lead come out with minimal flashing.
Use our Small Blackened Stainless Steel Loops with this mould for best results.
See the tip below to ensure you make the best leads you can with minimal hasle.
A little tip to make your life easier :
Whilst the mould is COLD, take a small pinch of BLUE TAC and roll it into a ball. Squash this ball of Blue Tac into the slots for the lead loops. Work it well into the slots then pick off any access Blue Tac. When you put your lead loops into position they will stick in place. Repeat this on both sides of the mould but remember to scrap off any Blue Tack that stands proud as it will stop the mould faces meeting properly and cause access flashing. If there is too much left there, you can scrape it off with a stanley knife quickly and easily.
This process will ensure your loops stay in place when you are pouring the lead into the mould AND also minimise flashing around the lead loops, saving you time and the awful job of cleaning up the flashing with knippers.
NOW THAT YOU HAVE READ THIS TRADE SECRET, YOU OWE ME £10 !!!!!!!!!!!!!!!!!!!!