Latest Products

Our new Monster Barbel Feeders are here. I have been asked for bigger feeders for the last couple of years and now we have them in sizes 3oz,4oz,6oz and 8oz, this is the 8oz option.

They are 80mm long and approx.45mm in diameter and will take a lot of feed down the botton in one go. Manuactured with a soze 8 Big Eye swivel, they will fit all lead clips on the market.

Out of Stock

Our new Monster Barbel Feeders are here. I have been asked for bigger feeders for the last couple of years and now we have them in sizes 3oz,4oz,6oz and 8oz, this is the 6oz option.

They are 80mm long and approx.45mm in diameter and will take a lot of feed down the botton in one go. Manuactured with a soze 8 Big Eye swivel, they will fit all lead clips on the market.

Out of Stock

Our new Monster Barbel Feeders are here. I have been asked for bigger feeders for the last couple of years and now we have them in sizes 3oz,4oz,6oz and 8oz, this is the 4oz option.

They are 80mm long and approx.45mm in diameter and will take a lot of feed down the botton in one go. Manuactured with a soze 8 Big Eye swivel, they will fit all lead clips on the market.

Out of Stock

Our new Monster Barbel Feeders are here. I have been asked for bigger feeders for the last couple of years and now we have them in sizes 3oz,4oz,6oz and 8oz, this is the 3oz option.

They are 80mm long and approx.45mm in diameter and will take a lot of feed down the botton in one go. Manuactured with a soze 8 Big Eye swivel, they will fit all lead clips on the market.

Out of Stock

Introducing our new Casting Cannon Ball Jig. I came up with this version with Jig Spinning in mind but also because of the problem of rigging slimmer soft plastics onto bigger Jig Heads and having them split. Most big jig heads are made with rigging big soft plastics and have a large barbed collar moulded into them, the Casting Cannon Ball has an 18 guage wire keeper moulded into it instead and allows you to moumt slimmer soft plastics onto large hooks on heavier jig heads.

There re currently three weight options on an 11/0 O’shaunessy and three weight options on a 13/0 O’Shaunessy hook, both with wide gapes and both super strong. The Jig has three stainless steel loops, two at the top to allow for verticle jigging or use the one at the front for Jig Spinning, the eye at the bottom allows for you to mount a stinger when using larger soft plastics.

Available in both Flourescent and Luminous Anti Chip colours with a big 3D eye secured in place with epoxy resin so it will not fall off after five minutes in the water.

All of these Cannon Ball Casting Jigs suit convention Shads and big grubs up to 15" long, they are finished to an extremely high standard. The 11/0 version is ideally suited to Jig Spinning, that is casting the pure away from the boat and jigging it all the way back along the bottom, a devastating method for catch Halibut in shallower waters.

We  offer these Jigs mounted on our own exclusive Monster Grubs, 10" in the 11/0 and 15"on the 13/0 with a  stinger.

In the smaller sizes these jigs will be ideal for casting to Coalfish shoals rigged with the 10" grubs, available in numerous colours they look stunning and in the clear waters of Norway the big eye and bright colours really stand out.

Sold in packs of 2, this is the 8oz Anti Chip Black version on an 11/0 hook you are buying

Available in 4oz,6oz,8oz - 11/0 and 8oz, 10oz an 12oz in 13/0.

 

In Stock

Introducing our new Casting Cannon Ball Jig. I came up with this version with Jig Spinning in mind but also because of the problem of rigging slimmer soft plastics onto bigger Jig Heads and having them split. Most big jig heads are made with rigging big soft plastics and have a large barbed collar moulded into them, the Casting Cannon Ball has an 18 guage wire keeper moulded into it instead and allows you to moumt slimmer soft plastics onto large hooks on heavier jig heads.

There re currently three weight options on an 11/0 O’shaunessy and three weight options on a 13/0 O’Shaunessy hook, both with wide gapes and both super strong. The Jig has three stainless steel loops, two at the top to allow for verticle jigging or use the one at the front for Jig Spinning, the eye at the bottom allows for you to mount a stinger when using larger soft plastics.

Available in both Flourescent and Luminous Anti Chip colours with a big 3D eye secured in place with epoxy resin so it will not fall off after five minutes in the water.

All of these Cannon Ball Casting Jigs suit convention Shads and big grubs up to 15" long, they are finished to an extremely high standard. The 11/0 version is ideally suited to Jig Spinning, that is casting the pure away from the boat and jigging it all the way back along the bottom, a devastating method for catch Halibut in shallower waters.

We  offer these Jigs mounted on our own exclusive Monster Grubs, 10" in the 11/0 and 15"on the 13/0 with a  stinger.

In the smaller sizes these jigs will be ideal for casting to Coalfish shoals rigged with the 10" grubs, available in numerous colours they look stunning and in the clear waters of Norway the big eye and bright colours really stand out.

Sold in packs of 2, this is the 6oz Anti Chip Black version on an 11/0 you are buying

Available in 4oz,6oz,8oz - 11/0 and 8oz, 10oz an 12oz in 13/0.

 

Out of Stock

Introducing our new Casting Cannon Ball Jig. I came up with this version with Jig Spinning in mind but also because of the problem of rigging slimmer soft plastics onto bigger Jig Heads and having them split. Most big jig heads are made with rigging big soft plastics and have a large barbed collar moulded into them, the Casting Cannon Ball has an 18 guage wire keeper moulded into it instead and allows you to moumt slimmer soft plastics onto large hooks on heavier jig heads.

There re currently three weight options on an 11/0 O’shaunessy and three weight options on a 13/0 O’Shaunessy hook, both with wide gapes and both super strong. The Jig has three stainless steel loops, two at the top to allow for verticle jigging or use the one at the front for Jig Spinning, the eye at the bottom allows for you to mount a stinger when using larger soft plastics.

Available in both Flourescent and Luminous Anti Chip colours with a big 3D eye secured in place with epoxy resin so it will not fall off after five minutes in the water.

All of these Cannon Ball Casting Jigs suit convention Shads and big grubs up to 15" long, they are finished to an extremely high standard. The 11/0 version is ideally suited to Jig Spinning, that is casting the pure away from the boat and jigging it all the way back along the bottom, a devastating method for catch Halibut in shallower waters.

We  offer these Jigs mounted on our own exclusive Monster Grubs, 10" in the 11/0 and 15"on the 13/0 with a  stinger.

In the smaller sizes these jigs will be ideal for casting to Coalfish shoals rigged with the 10" grubs, available in numerous colours they look stunning and in the clear waters of Norway the big eye and bright colours really stand out.

Sold in packs of 2, this is the 4oz Black Anti Chip coating on an 11/0 you are buying

Available in 4oz,6oz,8oz - 11/0 and 8oz, 10oz an 12oz in 13/0.

 

In Stock

Introducing our new Casting Cannon Ball Jig. I came up with this version with Jig Spinning in mind but also because of the problem of rigging slimmer soft plastics onto bigger Jig Heads and having them split. Most big jig heads are made with rigging big soft plastics and have a large barbed collar moulded into them, the Casting Cannon Ball has an 18 guage wire keeper moulded into it instead and allows you to moumt slimmer soft plastics onto large hooks on heavier jig heads.

There re currently three weight options on an 11/0 O’shaunessy and three weight options on a 13/0 O’Shaunessy hook, both with wide gapes and both super strong. The Jig has three stainless steel loops, two at the top to allow for verticle jigging or use the one at the front for Jig Spinning, the eye at the bottom allows for you to mount a stinger when using larger soft plastics.

Available in both Flourescent and Luminous Anti Chip colours with a big 3D eye secured in place with epoxy resin so it will not fall off after five minutes in the water.

All of these Cannon Ball Casting Jigs suit convention Shads and big grubs up to 15" long, they are finished to an extremely high standard. The 11/0 version is ideally suited to Jig Spinning, that is casting the pure away from the boat and jigging it all the way back along the bottom, a devastating method for catch Halibut in shallower waters.

We  offer these Jigs mounted on our own exclusive Monster Grubs, 10" in the 11/0 and 15"on the 13/0 with a  stinger.

In the smaller sizes these jigs will be ideal for casting to Coalfish shoals rigged with the 10" grubs, available in numerous colours they look stunning and in the clear waters of Norway the big eye and bright colours really stand out.

Sold in packs of 2, this is the 10oz Ruby Red version on a 13/0 you are buying

Available in 4oz,6oz,8oz - 11/0 and 8oz, 10oz an 12oz in 13/0.

 

Out of Stock

Introducing our new Casting Cannon Ball Jig. I came up with this version with Jig Spinning in mind but also because of the problem of rigging slimmer soft plastics onto bigger Jig Heads and having them split. Most big jig heads are made with rigging big soft plastics and have a large barbed collar moulded into them, the Casting Cannon Ball has an 18 guage wire keeper moulded into it instead and allows you to moumt slimmer soft plastics onto large hooks on heavier jig heads.

There re currently three weight options on an 11/0 O’shaunessy and three weight options on a 13/0 O’Shaunessy hook, both with wide gapes and both super strong. The Jig has three stainless steel loops, two at the top to allow for verticle jigging or use the one at the front for Jig Spinning, the eye at the bottom allows for you to mount a stinger when using larger soft plastics.

Available in both Flourescent and Luminous Anti Chip colours with a big 3D eye secured in place with epoxy resin so it will not fall off after five minutes in the water.

All of these Cannon Ball Casting Jigs suit convention Shads and big grubs up to 15" long, they are finished to an extremely high standard. The 11/0 version is ideally suited to Jig Spinning, that is casting the pure away from the boat and jigging it all the way back along the bottom, a devastating method for catch Halibut in shallower waters.

We  offer these Jigs mounted on our own exclusive Monster Grubs, 10" in the 11/0 and 15"on the 13/0 with a  stinger.

In the smaller sizes these jigs will be ideal for casting to Coalfish shoals rigged with the 10" grubs, available in numerous colours they look stunning and in the clear waters of Norway the big eye and bright colours really stand out.

Sold in packs of 2, this is the 12oz Green Chartreuse version on a 13/0 hook you are buying

Available in 4oz,6oz,8oz - 11/0 and 8oz,10oz and 12oz on a 13/0.

 

In Stock

Introducing our new Casting Cannon Ball Jig. I came up with this version with Jig Spinning in mind but also because of the problem of rigging slimmer soft plastics onto bigger Jig Heads and having them split. Most big jig heads are made with rigging big soft plastics and have a large barbed collar moulded into them, the Casting Cannon Ball has an 18 guage wire keeper moulded into it instead and allows you to moumt slimmer soft plastics onto large hooks on heavier jig heads.

There re currently three weight options on an 11/0 O’shaunessy and three weight options on a 13/0 O’Shaunessy hook, both with wide gapes and both super strong. The Jig has three stainless steel loops, two at the top to allow for verticle jigging or use the one at the front for Jig Spinning, the eye at the bottom allows for you to mount a stinger when using larger soft plastics.

Available in both Flourescent and Luminous Anti Chip colours with a big 3D eye secured in place with epoxy resin so it will not fall off after five minutes in the water.

All of these Cannon Ball Casting Jigs suit convention Shads and big grubs up to 15" long, they are finished to an extremely high standard. The 11/0 version is ideally suited to Jig Spinning, that is casting the pure away from the boat and jigging it all the way back along the bottom, a devastating method for catch Halibut in shallower waters.

We  offer these Jigs mounted on our own exclusive Monster Grubs, 10" in the 11/0 and 15"on the 13/0 with a  stinger.

In the smaller sizes these jigs will be ideal for casting to Coalfish shoals rigged with the 10" grubs, available in numerous colours they look stunning and in the clear waters of Norway the big eye and bright colours really stand out.

Sold in packs of 2, this is the 10oz Green Chartreuse version om a 12/0 hook you are buying

Available in 4oz,6oz,8oz - 11/0 and 8oz, 10oz an 12oz in 13/0.

 

In Stock

Introducing our new Casting Cannon Ball Jig. I came up with this version with Jig Spinning in mind but also because of the problem of rigging slimmer soft plastics onto bigger Jig Heads and having them split. Most big jig heads are made with rigging big soft plastics and have a large barbed collar moulded into them, the Casting Cannon Ball has an 18 guage wire keeper moulded into it instead and allows you to moumt slimmer soft plastics onto large hooks on heavier jig heads.

There re currently three weight options on an 11/0 O’shaunessy and three weight options on a 13/0 O’Shaunessy hook, both with wide gapes and both super strong. The Jig has three stainless steel loops, two at the top to allow for verticle jigging or use the one at the front for Jig Spinning, the eye at the bottom allows for you to mount a stinger when using larger soft plastics.

Available in both Flourescent and Luminous Anti Chip colours with a big 3D eye secured in place with epoxy resin so it will not fall off after five minutes in the water.

All of these Cannon Ball Casting Jigs suit convention Shads and big grubs up to 15" long, they are finished to an extremely high standard. The 11/0 version is ideally suited to Jig Spinning, that is casting the pure away from the boat and jigging it all the way back along the bottom, a devastating method for catch Halibut in shallower waters.

We  offer these Jigs mounted on our own exclusive Monster Grubs, 10" in the 11/0 and 15"on the 13/0 with a  stinger.

In the smaller sizes these jigs will be ideal for casting to Coalfish shoals rigged with the 10" grubs, available in numerous colours they look stunning and in the clear waters of Norway the big eye and bright colours really stand out.

Sold in packs of 2, this is the 6oz Flouro Red version you are buying

Available in 4oz,6oz,8oz - 11/0 and 8oz, 10oz an 12oz in 13/0.

 

In Stock

Introducing our new Casting Cannon Ball Jig. I came up with this version with Jig Spinning in mind but also because of the problem of rigging slimmer soft plastics onto bigger Jig Heads and having them split. Most big jig heads are made with rigging big soft plastics and have a large barbed collar moulded into them, the Casting Cannon Ball has an 18 guage wire keeper moulded into it instead and allows you to moumt slimmer soft plastics onto large hooks on heavier jig heads.

There re currently three weight options on an 11/0 O’shaunessy and three weight options on a 13/0 O’Shaunessy hook, both with wide gapes and both super strong. The Jig has three stainless steel loops, two at the top to allow for verticle jigging or use the one at the front for Jig Spinning, the eye at the bottom allows for you to mount a stinger when using larger soft plastics.

Available in both Flourescent and Luminous Anti Chip colours with a big 3D eye secured in place with epoxy resin so it will not fall off after five minutes in the water.

All of these Cannon Ball Casting Jigs suit convention Shads and big grubs up to 15" long, they are finished to an extremely high standard. The 11/0 version is ideally suited to Jig Spinning, that is casting the pure away from the boat and jigging it all the way back along the bottom, a devastating method for catch Halibut in shallower waters.

We  offer these Jigs mounted on our own exclusive Monster Grubs, 10" in the 11/0 and 15"on the 13/0 with a  stinger.

In the smaller sizes these jigs will be ideal for casting to Coalfish shoals rigged with the 10" grubs, available in numerous colours they look stunning and in the clear waters of Norway the big eye and bright colours really stand out.

Sold in packs of 2, this is the 4oz version you are buying in Flouro Green Chartreuse

Available in 4oz,6oz,8oz - 11/0 and 8oz, 10oz an 12oz in 13/0.

 

In Stock

Introducing our new Casting Cannon Ball Jig. I came up with this version with Jig Spinning in mind but also because of the problem of rigging slimmer soft plastics onto bigger Jig Heads and having them split. Most big jig heads are made with rigging big soft plastics and have a large barbed collar moulded into them, the Casting Cannon Ball has an 18 guage wire keeper moulded into it instead and allows you to moumt slimmer soft plastics onto large hooks on heavier jig heads.

There re currently three weight options on an 11/0 O’shaunessy and three weight options on a 13/0 O’Shaunessy hook, both with wide gapes and both super strong. The Jig has three stainless steel loops, two at the top to allow for verticle jigging or use the one at the front for Jig Spinning, the eye at the bottom allows for you to mount a stinger when using larger soft plastics.

Available in both Flourescent and Luminous Anti Chip colours with a big 3D eye secured in place with epoxy resin so it will not fall off after five minutes in the water.

All of these Cannon Ball Casting Jigs suit convention Shads and big grubs up to 15" long, they are finished to an extremely high standard. The 11/0 version is ideally suited to Jig Spinning, that is casting the pure away from the boat and jigging it all the way back along the bottom, a devastating method for catch Halibut in shallower waters.

We  offer these Jigs mounted on our own exclusive Monster Grubs, 10" in the 11/0 and 15"on the 13/0 with a  stinger.

In the smaller sizes these jigs will be ideal for casting to Coalfish shoals rigged with the 10" grubs, available in numerous colours they look stunning and in the clear waters of Norway the big eye and bright colours really stand out.

Sold in packs of 2, this is the 6oz version you are buying

Available in 4oz,6oz,8oz - 11/0 and 8oz, 10oz an 12oz in 13/0.

 

In Stock

Introducing our new Casting Cannon Ball Jig. I came up with this version with Jig Spinning in mind but also because of the problem of rigging slimmer soft plastics onto bigger Jig Heads and having them split. Most big jig heads are made with rigging big soft plastics and have a large barbed collar moulded into them, the Casting Cannon Ball has an 18 guage wire keeper moulded into it instead and allows you to moumt slimmer soft plastics onto large hooks on heavier jig heads.

There re currently three weight options on an 11/0 O’shaunessy and three weight options on a 13/0 O’Shaunessy hook, both with wide gapes and both super strong. The Jig has three stainless steel loops, two at the top to allow for verticle jigging or use the one at the front for Jig Spinning, the eye at the bottom allows for you to mount a stinger when using larger soft plastics.

Available in both Flourescent and Luminous Anti Chip colours with a big 3D eye secured in place with epoxy resin so it will not fall off after five minutes in the water.

All of these Cannon Ball Casting Jigs suit convention Shads and big grubs up to 15" long, they are finished to an extremely high standard. The 11/0 version is ideally suited to Jig Spinning, that is casting the pure away from the boat and jigging it all the way back along the bottom, a devastating method for catch Halibut in shallower waters.

We  offer these Jigs mounted on our own exclusive Monster Grubs, 10" in the 11/0 and 15"on the 13/0 with a  stinger.

In the smaller sizes these jigs will be ideal for casting to Coalfish shoals rigged with the 10" grubs, available in numerous colours they look stunning and in the clear waters of Norway the big eye and bright colours really stand out.

Sold in packs of 2, this is the 4oz version you are buying

Available in 4oz,6oz,8oz - 11/0 and 8oz, 10oz an 12oz in 13/0.

 

 

 

In Stock

Quality trebles for both making Pike Dead Bait traces and upgrading trebles on your lures. Super Sharp black nickel finish and good and strong. Use for  big dead baits, rigging lures and live baiting for Bass.

Sold in packs of 10

You are buying the size 1/-0 Power Trebles

Out of Stock

Quality trebles for both making Pike Dead Bait traces and upgrading trebles on your lures. Super Sharp black nickel finish and good and strong.

Use these larger sizes for bigger dead baits and re rigging lures

Sold in packs of 10

You are buying the size 1 Power Trebles

In Stock

Quality trebles for both making Pike Dead Bait traces and upgrading trebles on your lures. Super Sharp black nickel finish and good and strong.

Sold in packs of 10

You are buying the size 2 Power Trebles

Use the size 2 and 1 when using larger dead baits

In Stock

Quality trebles for both making Pike Dead Bait traces and upgrading trebles on your lures. Super Sharp black nickel finish and good and strong.

Sold in packs of 10

You are buying the size 4 Power Trebles

In Stock

Quality trebles for both making Pike Dead Bait traces and upgrading trebles on your lures. Super Sharp black nickel finish and good and strong.

Sold in packs of 10

You are buying the size 6 Power Trebles

In Stock

Quality trebles for both making Pike Dead Bait traces and upgrading trebles on your lures. Super Sharp black nickel finish and good and strong.

Sold in packs of 10

You are buying the size 8 Power Trebles

In Stock

Solid Welded Rings 6mm for making Heli Leads. Place on the loop instead of a swivels and pour you lead.

Sold in packs of 100

In Stock

These Crane swivels are 295lb breaking strain, size would be size 1. Perfect for lighter rigs for Norway.

Extremely strong and reliable.

Sold in packs of 10

In Stock

A green twin tailed version of the Perch Pattern also listed. A quality inexpensive lure that will catch fish in both rivers and still waters.

In Stock

My favourite all time Mackerel Feather, great here and in Norway.

In Stock