We have a range of moulds for sea fishing including Grip Lead Moulds, Watch Lead Moulds, Beach Bomb Moulds, Bopedo Moulds, various Jig Head Moulds.
Grip Leads moulds are available in 4oz, 5oz, 6oz and 7oz. Watch Lead Moulds are available in 4oz+5oz, 6oz+8oz, 10oz, 12oz, 16oz and extremely good moulds they are too.
Bopedo Moulds are available in 8oz, 10oz (new), 12oz, 16oz and 24oz. These are the Storm mould and are remarkable value for money producing perfet leads everytime (as long as you keep the mould faces clean) with no flashing, just a pouring sprue to be cut off.
Beach Bomb Moulds are available in 3oz, 4oz, 5oz, 6oz. With these moulds use the Small Stainless Steel loops. When you purchase one of these moulds, you need to make the loop slots slightly deeper to accept the small stainless loops. This is easily done using a hacksaw blade,simply put one half of the mould in a vice and gently run the blade through each slot a couple of time, switch to the other mould half and repeat the process then place the loop in the mould, put the mould together and hold up to the light squeezing the plate together. You are looking to ensure minimal light can be seen between the faces. This will ensure that every lead is perfect with no flashing evident. It takes minimal time but will ensure every lead you pour is perfect.
New Inline Drifting Lead , basically a large drilled bullet that accepts a plastic tube. This mould produces two leads of 6oz and 8oz and when moulded accept a 3mm plastic tube through the middle of it allowing the line to slide through the middle without rubbing on the lead.
New Inline Drifting Lead , basically a large drilled bullet that accepts a plastic tube. This mould produces two leads of 70g,100g,130g (2.5oz,3.5oz,4.6oz) and when moulded accept a 3mm plastic tube through the middle of it allowing the line to slide through the middle without rubbing on the lead.
Boat Bomb Mould (Bopedo Mould) is probobly the no.1 mould for ground fishing from a boat closely followed by the Cannon Ball. These moulds are a copy of the original DCA Bopedo mould but are a better quality mould as they are injection moulded and not sand cast resulting in a higher quality finish to the leads. Supplied with 50 Brass loops.
Three cavity mould supplied with 100 Stainless Steel Loops. Nice clean finish to the leads with minimal flashing. A cheap mould but a quality mould to produce you Cannon Ball Leads
Great 4 in 1 mould proding leads of approx. 3,4,5,6oz. Supplied with 100 stainless steel loops. Also suitable for making Zip Leads for Carp Fishing.
Note: Leads in picture not included.
8oz mould + 100 stainless loops. This mould produces large grip leads for Barbel anglers fishing in flood water summer and winter. The whole is often filled with paste for added attraction to your bait. It is available in sizes from 2.5oz, 3oz, 4oz, 6oz and 8oz.
See our range of powder coating to produce the finished leads in the colour you require.
Great mould, minimal flashing / cleaning up after pouring.
Stunning moulds for the price. Available in 3oz, 4oz, 5oz, 6oz and supplied with 50 loops. For replacement loops, order Small Stainless Steel loops or Small Blackened Stainless loops for Carp anglers. Can be used for distance casting leads for sea fishing and also for procuing high quality Zip leads for Carp Fishing.
Two cavity Distance, Beach Bomb, Zip Lead Mould. Call it what you will this is a good one. Lead shown in picture (not included in the sale) has simply had the sprue clipped off and a couple of taps to flatten the flashing but that`s it. 2 seconds to clean the lead up, no more. For both beach and Carp fishing, this mould is a good investment.
Available in four sizes, each mould is supplied in a kit form:
Available in 8oz, 10oz, 12oz, 16oz and 24oz, see options. Use with Standard Stainless Lead Loops in 8oz, 10oz and Bopedo Loops (pukka ones) in the 12oz, 16oz and 24oz. For bottom fishing when you do not want your bait / lead moving around the sea bed.
New Cannon Ball Mould in five sizes. Each mould is supplied with 100 stainless loops to fit.
Available in twin cavity 6oz + 8oz. 3 cavity 3,4,5oz
Single cavity 10oz, 12oz, 14oz, 24oz, see options.
Twin cavity moulds availble in two sizes, 1oz , 2oz, 4oz + 5oz, 6oz + 8oz. Ideal for Plaice fishing on the drift inshore. Add an appropriate swivel compatable with a lead clip and you can produce leads ideal for Barbel fishing, the 1oz and 2oz moulds being idealy suits to this purpose.
New one, and a bloody good one. Available in 8oz and 10oz (see options). It will produce Gilling Leads or Uptide leads. Use a short tail wire not a loop.
NOTE: I have drilled down the short tail wire hole slightly to reduce the distance between the lead and the loop to reduce tangles. Easy to do, drill and a vice and take you time. I can do this for you if you so wish but there is a £3.00 charge for my time. If you want it done, select the converted mould in the options.
This 10oz mould produces a good jig using a smaller hook than Do-it Molds, a size 5/0, 6/0 or 7/0 Eagle Claw 635 will fit. a Mustad 91715 in 6/0 or 7/0 will fit with a little modification and Mustad 91715 8/0 or 9/0 and Mustad 34184 8/0 will also fit with a little modification. Mould the jig with the hook size you require, coat it, paint it or leave it as plain lead, rig it with a 6" Twin Tail, Mag Grub or similar and you are away.
This mould produces three leads per pouring, 2oz, 3oz and 4oz. Use and long or short tail wire to make these leads for more or less grip in the surf. You can also use a Short Tail Wire with a Bait Clip if you want these leads for distance casting.
Growing in popularity for anglers fishing sandy beaches for Flat Fish and also for surf fishing for Bass.
Quality mould that produces quality leads.