Salt Water Jig Heads

We offer a very large range of Jig Heads for both freshwater and sea fishing. Our Jig Heads start currently at 3 grams and go up to 24oz (672g). We use VMC, Mustad and Eagle Claw Hooks.

Our Jig Heads cover all aspects of sea fishing from the smallest Pollack caught with a two inch grup on a 3g size 6 jig to a 200lb + Halibut caught in Norway on a 16oz Hali Jig.

Our Jigs are Powder Coated with chip resistant flourescent colours, lumi colours and Candy Coat colours. We also offer a holographic Clear Glitter Coat with is applied to shiny lead producing a glitter coated shiny lure to attract attention. We DO NOT use plastic coating which gives a dull finish, dull colour which is not very appealing. Our Powder Coating is baked on and gives a ultra high quality finish.  Prime colours are Flourescent Orange, Flourescent Pink, Flourescent Green Chartreuse along with nine other colour options. We also offer a LUMI finish which if charged in sunlight or with a pencil torch will glow like a dull light bulb. Hang a lure in your house with the lights on, when you go to bed and turn the lights off, you will see it glowing. This finish is extremely effective in deep water.

All of our Saltwater Jig Heads / Lead Heads can be used for freshwater fishing as well as sea fishing, a prime example being our 14g Shad Head Jig on a 5/0 VMC hook, ideal for Pike when using all manor of Shads and Swimbait lures.

These jigs made exclusively by us using VMC jig hooks are fantastic for Gilling for Cod and Pollack.  The 5/0 is ultra sharp, has a short shank which allows the plastic lure to work and has a wide gape to ensure strong hook hold on big fish.

  • Sold in packs of 5
  • Multiple colour options, see options
  • Available in 21g and 28g, 5/0  See options
  • See colour examples below

In Stock

The image displayed is NOT what you will recieve when you order these jigs, that picture is used to show what you can achieve with minimal effort and expense. You will recieve the plain un-dress jig pictured in teh additional images.

Fantastic little jigs for Bass, Mackerel, Pollack, Perch and Pike.  Supplies made and powcer coated in lumi white.  All you need to do is tie on the tail or thread on a small jelly worm and you are away.

  • Tie on Buck Tail for Bass, Pollock, Pike, Perch
  • For Mackerel, silver tinsel or even better a length of Mylar tubing using Red thread
  • Available in three sizes
  • SOLD PLAIN / UNRIGGED READY FOR YOU TO TIE / RIG. THE BUCK TAIL VERSION IN THE PICTURE IS SIMPLY TO SHOW A FINISHED LURE

In Stock

These slugs / Jig Heads are made using an 8/0 super strong VMC jig hook. Very wide gape to eliminate hook pulls, when these hooks go in they do not come out.

  • Available in four sizes
  • Ideal for hopping for Cod or using with a fat grub when gilling
  • See options for sizes
  • For postage, please remember to see our terms regarding postage costs
  • Numerous colour options, see options
  • 10/0 Version also available for huge Cod / Norway Cod, see listing.

Top quality Jigs made in the UK using top quality hooks that are 100% reliable, you will struggle to buy better Jig Head anywhere.

In Stock

Pack of 5 wide gape 6/0 Ball Jigs. Ideal for Cod, Pollack, Pike etc in uk waters.

  • 6/0 VMC Jig Hook
  • Multiple colour options
  • Black Nickel hook does not split soft plastic lures but is extremely strong and reliable
  • Ball Jigs, Jigs, Lead Heads, Jig Heads. Different names for the same products.

In Stock

28g (1oz) Jig on a wide gape 7/0 VMC hook. Ideal for Cod and Pollack, Pike etc.

  • 7/0 VMC Hook
  • Multiple Colour Options
  • Jig Heads,Ball Jigs, Jigs, Lead Heads. Different names for the same products.

In Stock

1.5oz (42g) Shad Head on a super strong wide gape VMC hook. Use for rigging 6",9" or 12" shads. Use in UK and Norway, nothing will bend these hooks. 

  • Multiple colour options

Top quality Jigs made in the UK using top quality hooks that are 100% reliable, you will struggle to buy better Jig Head anywhere.

In Stock

Made in England, these jigs will take Cod, Pollack, Halibut with easy. Manufactured using Mustad tinned O`Shaunessy 10/0 hooks.

 

  • Multiple Colour options
  • Also available with 12/0 hook - 20p additional cost

In Stock

Made in England, these jigs will take Cod, Pollack, Halibut with ease. Manufactured using Mustad tinned O`Shaunessy 10/0 hooks.

  • Multiple colour options

THE WEBSITE CANNOT CALCULATE THE COST OF SHIPPING HEAVY ITEMS MADE FROM LEAD, IN THE EVENT YOU ORDER THESE ITEMS ADDITIONAL POSTAGE MAY BE REQUIRED AND IN THIS CASE A PAYPAL MONEY REQUEST WILL BE SENT. ORDERS UP TO 2KG WILL BE SENT 2ND CLASS AT THE COST OF £3.00, UP TO 4KG WILL BE SENT VIA TWO PACKAGES AT £3.00 EACH, OVER 4KG WILL BE SENT VIA UPS COURIER AT THE COST OF £7.60 FOR UP TO 20KG

In Stock

Made in England, these jigs will take Cod, Pollack, Halibut with easy. Manufactured using Mustad tinned O`Shaunessy 12/0 hooks.

 

  • Available in multiple colour options
  • Also available in 24oz with 14/0 Hook, see options. This are special made to order only

In Stock

Made in England, these jigs will take Cod, Pollack, Halibut with easy. Manufactured using a wide gape black nickel hooks.

 

  • Available in multiple colours, see options

In Stock

Pack of three Ball Jigs manufactured using 8/0 VMC jig hooks. Orange is a known Cod killing colour and more recently flouro Pink has moved up the rank and is see as a Cod killing colour. 

In Stock

These Jig Heads were the first in our series of larger Lead Heads specifically designed for targeting Cod. We have over the years found that when fishing for big Cod with soft plastic lures conventional jigs if taken short result in a poor hook hold which results in lost fish. I wanted a Jig Head that was manufactured with a really wide gape hook that was not so thick it split all and any soft plastic lure you put on it. With considerable work and VMC hooks, we managed to come up with these Jigs and have not looked back since. These have proved very popular with Kyak anglers, rigged with a Twin Tail or Grub in the summer months they are deadly for Cod and Pollack. The wide gape hook ensures a really good hook up.

In Stock

These Jig Heads were the first in our series of larger Lead Heads specifically designed for targeting Cod. We have over the years found that when fishing for big Cod with soft plastic lures conventional jigs if taken short result in a poor hook hold which results in lost fish. I wanted a Jig Head that was manufactured with a really wide gape hook that was not so thick it split all and any soft plastic lure you put on it. With considerable work and VMC hooks, we managed to come up with these Jigs and have not looked back since. These Jig Heads / Lead Heads have accounted for lots of big Cod over the last few years, here and in Norway.

Top quality Jigs made in the UK using top quality hooks that are 100% reliable, you will struggle to buy better Jig Head anywhere.

In Stock

A 56g (2oz) Shad Head Jig for Cod fishing. These are manufactured using a black nickel 9/0 hook with a very wide gape to ensure an excellent hook hold that will prevent lost fish. Some may think that a Shad Head jig on a 9/0 hook is too big however, a 5lb Cod with its mouth opened can take the average mans fist in it, a 10lb Cod can swallow a mans fist so these jigs have been manufactured to give you the angler every chance of landing that fish of a life time.

Popular with Kyak anglers, rigged with a Shad or Grub these are great Jig Heads for Cod and Pollack.

In Stock

These Jig Heads were the first in our series of larger Lead Heads specifically designed for targeting Cod. We have over the years found that when fishing for big Cod with soft plastic lures conventional jigs if taken short result in a poor hook hold which results in lost fish. I wanted a Jig Head that was manufactured with a really wide gape hook that was not so thick it split all and any soft plastic lure you put on it. With considerable work and VMC hooks, we managed to come up with these Jigs and have not looked back since. These Jig Heads / Lead Heads have accounted for lots of big Cod over the last few years, here and in Norway.

In Stock

These Jig Heads were the first in our series of larger Lead Heads specifically designed for targeting Cod. We have over the years found that when fishing for big Cod with soft plastic lures conventional jigs if taken short result in a poor hook hold which results in lost fish. I wanted a Jig Head that was manufactured with a really wide gape hook that was not so thick it split all and any soft plastic lure you put on it. With considerable work and VMC hooks, we managed to come up with these Jigs and have not looked back since. Rig with a Tiger Twin Tail, a large Soft Plastic Grub and bounce them across the sea bed.

Popular with Kyak anglers, rigged with a Shad or Grub these are great Jig Heads for Cod and Pollack.

In Stock

These Jig Heads were the first in our series of larger Lead Heads specifically designed for targeting Cod. We have over the years found that when fishing for big Cod with soft plastic lures conventional jigs if taken short result in a poor hook hold which results in lost fish. I wanted a Jig Head that was manufactured with a really wide gape hook that was not so thick it split all and any soft plastic lure you put on it. With considerable work and VMC hooks, we managed to come up with these Jigs and have not looked back since. These have proved to be very popular with Kyak anglers. At the right time of the year when Cod are about they can be deadly rigged with a Twin Tail or a Grub.

In Stock

These Jig Heads were the first in our series of larger Lead Heads specifically designed for targeting Cod. We have over the years found that when fishing for big Cod with soft plastic lures conventional jigs if taken short result in a poor hook hold which results in lost fish. I wanted a Jig Head that was manufactured with a really wide gape hook that was not so thick it split all and any soft plastic lure you put on it. With considerable work and VMC hooks, we managed to come up with these Jigs and have not looked back since. These Jig Heads / Lead Heads have accounted for lots of big Cod over the last few years, here and in Norway. Rig with Shads, Grubs or Twin Tails.

Popular with Kyak anglers, rigged with a Shad or Grub these are great Jig Heads for Cod and Pollack.

In Stock

These Jig Heads were the first in our series of larger Lead Heads specifically designed for targeting Cod. We have over the years found that when fishing for big Cod with soft plastic lures conventional jigs if taken short result in a poor hook hold which results in lost fish. I wanted a Jig Head that was manufactured with a really wide gape hook that was not so thick it split all and any soft plastic lure you put on it. With considerable work and VMC hooks, we managed to come up with these Jigs and have not looked back since.

Popular with Kyak anglers, rigged with a Shad or Grub these are great Jig Heads for Cod and Pollack.

In Stock

These Jig Heads were the first in our series of larger Lead Heads specifically designed for targeting Cod. We have over the years found that when fishing for big Cod with soft plastic lures conventional jigs if taken short result in a poor hook hold which results in lost fish. I wanted a Jig Head that was manufactured with a really wide gape hook that was not so thick it split all and any soft plastic lure you put on it. With considerable work and VMC hooks, we managed to come up with these Jigs and have not looked back since. 

Popular with Kyak anglers, rigged with a Shad or Grub these are great Jig Heads for Cod and Pollack.

In Stock

3/4oz Shad Head jig is suitable for not only boat fishing but also casting from the shore. Rigged with a suitable lure it will allow you to cast long distances from the shore. Hook ups are assured because of the wide gape VMC jig hooks used to manufacture these jig heads and they a super strong and extremely reliable.

From the boat, you can be sure that any Cod or Pollack that attacks your lure will be handled with ease on these jigs. Rig 5" or 6" shads for Pollack or Cod.

In Stock

These Jig Heads were the first in our series of larger Lead Heads specifically designed for targeting Cod. We have over the years found that when fishing for big Cod with soft plastic lures conventional jigs if taken short result in a poor hook hold which results in lost fish. I wanted a Jig Head that was manufactured with a really wide gape hook that was not so thick it split all and any soft plastic lure you put on it. With considerable work and VMC hooks, we managed to come up with these Jigs and have not looked back since. 

Popular with Kyak anglers, rigged with a Shad or Grub these are great Jig Heads for Cod and Pollack.

In Stock

These Jig Heads were the first in our series of larger Lead Heads specifically designed for targeting Cod. We have over the years found that when fishing for big Cod with soft plastic lures conventional jigs if taken short result in a poor hook hold which results in lost fish. I wanted a Jig Head that was manufactured with a really wide gape hook that was not so thick it split all and any soft plastic lure you put on it. With considerable work and VMC hooks, we managed to come up with these Jigs and have not looked back since. These Jig Heads / Lead Heads have accounted for lots of big Cod over the last few years rigged with Twin Tails ar larger Soft Plastic Grubs.

These jigs have proven very popular with Kyak anglers fishing inshore on rough ground.

In Stock

These Shad Head Jigs / Jigs Heads are suitable for Bass, Pollack, Cod etc and also Pike and Zander. They cast extremely well but are not too heavy so that your lure drops like a stone through the water allowing you to fish over and around snags with getting hook up in the structure features your want to fish close too. 

I personally have caught Pollack to 22lb, Cod to 25lb and Bass to 8lbs on these jigs without any problems. The wide gape hook ensures a solid hook hold allowing you to apply maximum pressure when needed.

These are top quality Jig Heads made with top quality hooks, 100% reliable and the product is made in the UK

In Stock

These Jig Heads are probably the most popular size Jig Head for hopping over rough ground and English Channel wrecks that we sell. Manufactured using VMC wide gape jig hooks which are super strong. Rig with a Tiger Twin Tail, Grub, Shad or Jelly Worm and bounce it across the bottom for some serious action from Cod this season.

A short trace, two or three feet long made from 25lb to 40lb mono attached to a 10" long boom. Drop the rig down to the sea bed then tighten the line with the rod to close to the water, then just raise and lower slowly and be prepared for the take.

Top quality Jigs made in the UK using top quality hooks that are 100% reliable, you will struggle to buy better Jig Head anywhere.

In Stock

1oz Shad Head jig is suitable for not only boat fishing but also casting from the shore. Rigged with a suitable lure it will allow you to cast long distances from the shore. Hook ups are assured because of the wide gape VMC jig hooks used to manufacture these jig heads and they a super strong and extremely reliable.

From the boat, you can be sure that any Cod or Pollack that attacks your lure will be handled with ease on these jigs. Rig 5" or 6" shads for Pollack or Cod.

In Stock

11/2oz / 42g Shad Head jig is suitable for not only boat fishing but also casting from the shore. Rigged with a suitable lure it will allow you to cast long distances from the shore. Hook ups are assured because of the wide gape VMC jig hooks used to manufacture these jig heads and they a super strong and extremely reliable.

From the boat, you can be sure that any Cod or Pollack that attacks your lure will be handled with ease on these jigs. Rig 5" or 6" shads for Pollack or Cod.

Top quality Jigs made in the UK using top quality hooks that are 100% reliable, you will struggle to buy better Jig Head anywhere.

In Stock

Spirepoint Jigs are used without a boom or lead weight and are ideal for bouncing across the sea bed or over a wreck site for Cod and are especially useful when the Cod are feeding hard on the bottom. In the small sizes, they are popular with inshore boat anglers / kyak anglers and in the larger sizes are used for wrecking and fishing for huge Cod in Norway.

They can be rigged with various soft plastic lures, grubs, twin tails or shads. You can see from the additional images the rigged lures and they are extremely effective. There are numerous colour options, see options to pick the colours your require. Stock colours are Flouro Orange, Flouro Pink and Flouro Red, all other colour are coated to order. We do have considerable stock of uncoated jigs to coat to customer requirement. 

When coated, all jigs are baked for a durable chip resistant finish then a 3D eye is applied and a clear coat is applied over the eye to seal it in position.

All hooks in this range of jigs are Mustad O`Shaunessy 3407 duratin from 9/0 up to 12/0, extremely strong and salt water corrosion resistant.

In Stock

We developed these jigs for fishing for Coalfish in Norway as we found than 90% of all other jig heads could not take the abuse that Coalfish give and the hooks straightened or broke under the extreme pressure. 

Bring on the Super Slug Jig Heads, wide gape, extremel sharp but most importantly super strong. 

We rig them with 20cm Savage Gear Sandeels and they are brilliant for Cod, Pollack and Coalfish, even caught Halibut on them to 50lb with no problems at all.

Additional image show the Super Slug rigged on the sandeel body, notice how much hook is clear of the lure, there is no mistaking when fishing with these jigs, when the hook goes in it stays in, especially in big fish.

In Stock

We developed these jigs for fishing for Coalfish in Norway as we found than 90% of all other jig heads could not take the abuse that Coalfish give and the hooks straightened or broke under the extreme pressure. 

Bring on the Super Slug Jig Heads, wide gape, extremel sharp but most importantly super strong. 

We rig them with 20cm Savage Gear Sandeels and they are brilliant for Cod, Pollack and Coalfish, even caught Halibut on them to 50lb with no problems at all.

Additional image show the Super Slug rigged on the sandeel body, notice how much hook is clear of the lure, there is no mistaking when fishing with these jigs, when the hook goes in it stays in, especially in big fish.

In Stock

We developed these jigs for fishing for Coalfish in Norway as we found than 90% of all other jig heads could not take the abuse that Coalfish give and the hooks straightened or broke under the extreme pressure. 

We used these jigs for casting from the boat in `A` for the huge Coalfish which were in massive numbers just under the surface.

Bring on the Super Slug Jig Heads, wide gape, extremel sharp but most importantly super strong. 

We rig them with 20cm Savage Gear Sandeels and they are brilliant for Cod, Pollack and Coalfish, even caught Halibut on them to 50lb with no problems at all.

Additional image show the Super Slug rigged on the sandeel body, notice how much hook is clear of the lure, there is no mistaking when fishing with these jigs, when the hook goes in it stays in, especially in big fish.

In Stock

These jigs made exclusively by us using VMC jig hooks are fantastic for Gilling for Cod and Pollack.  The 5/0 is ultra sharp, has a short shank which allows the plastic lure to work and has a wide gape to ensure strong hook hold on big fish.

  • Sold in packs of 4
  • These are 21g (three quater oz) 5/0 VMC Jig Hook
  • Super Strong, Super Sharp
  • Plain Lead finish

In Stock

These jigs made exclusively by us using VMC jig hooks are fantastic for Gilling for Cod and Pollack.  The 5/0 is ultra sharp, has a short shank which allows the plastic lure to work and has a wide gape to ensure strong hook hold on big fish.

  • Sold in packs of 4
  • These are 28g (one oz) 5/0 VMC Jig Hook
  • Super Strong, Super Sharp
  • Plain Lead finish

In Stock

Pack of 4 wide gape 6/0 Ball Jigs. Ideal for Cod, Pollack, Pike etc in uk waters.

  • 6/0 VMC Jig Hook
  • Wide Gape, Black Nickel hook does not split soft plastic lures but is extremely strong and reliable
  • Ball Jigs, Jigs, Lead Heads, Jig Heads. Different names for the same products.
  • Plain Lead finish, made in the UK

In Stock

Pack of 4 wide gape 6/0 Ball Jigs. Ideal for Cod, Pollack, Pike etc in uk waters.

  • 6/0 VMC Jig Hook
  • Wide Gape, Black Nickel hook does not split soft plastic lures but is extremely strong and reliable
  • Ball Jigs, Jigs, Lead Heads, Jig Heads. Different names for the same products.
  • Plain Lead finish, made in the UK

In Stock

Pack of 4 wide gape 6/0 Ball Jigs. Ideal for Cod, Pollack, Pike etc in uk waters.

  • 6/0 VMC Jig Hook
  • Wide Gape, Black Nickel hook does not split soft plastic lures but is extremely strong and reliable
  • Ball Jigs, Jigs, Lead Heads, Jig Heads. Different names for the same products.
  • Plain Lead finish, made in the UK

In Stock

This 21g Cone Head Shad Head is manufactured with a VMC 6/0 - 2X strong hook. Ideal for Cod, Pollack, Bass etc and also Pike. Additional image shows the smaller sizes rigged with a 15cm Sandeel, this one suits the 20cm Savage Sandeel perfectly.

Thes are sold in Plain Lead but we can powder coat them if required (contact us).

Sold in a pack of 4.

In Stock

This 28g (1oz) Cone Head Shad Head is manufactured with a VMC 6/0 - 2X strong hook. Ideal for Cod, Pollack, Bass etc and also Pike. Additional image shows the smaller sizes rigged with a 15cm Sandeel, this one suits the 20cm Savage Sandeel perfectly.

Thes are sold in Plain Lead but we can powder coat them if required (contact us).

Sold in a pack of 4.

In Stock

This 42g Cone Head Shad Head is manufactured with a VMC 7/0 - 2X strong hook with a very wide gape. Ideal for Cod, Pollack, Bass etc and also Pike. Additional image shows the smaller sizes rigged with a 15cm Sandeel, this one suits the 20cm Savage Sandeel perfectly.

Thes are sold in Plain Lead but we can powder coat them if required (contact us).

Sold in a pack of 4.

In Stock

This 56g (2oz) Cone Head Shad Head is manufactured with a VMC 7/0 - 2X strong hook. Ideal for Cod, Pollack, Bass etc and also Pike. Additional image shows the smaller sizes rigged with a 15cm Sandeel, this one suits the 20cm Savage Sandeel perfectly.

Thes are sold in Plain Lead (this version with no 3D eye) but we can powder coat them if required (contact us).

Sold in a pack of 4.

Additional images clearly show the finish quality of our jigs. Looking at other image of jig on offer, they have not been properly made, they have not bee cleaned up properly after they come out of the mould, basically crap. You will only receive quality product from us.

In Stock

This 28g (1oz) Cone Head Shad Head is manufactured with a VMC 5/0 - 2X strong hook. Ideal for Cod, Pollack, Bass etc and also Pike. Additional image shows the smaller sizes rigged with a 15cm Sandeel, this one suits the 20cm Savage Sandeel perfectly.

Thes are sold in Plain Lead (this version with no 3D eye) but we can powder coat them if required (contact us).

Sold in a pack of 4.

Additional images clearly show the finish quality of our jigs. Looking at other image of jig on offer, they have not been properly made, they have not bee cleaned up properly after they come out of the mould, basically crap. You will only receive quality product from us.

In Stock

This 56g (2oz) Cone Head Shad Head is manufactured with a VMC 6/0 - 2X strong hook. Ideal for Cod, Pollack, Bass etc and also Pike. Additional image shows the smaller sizes rigged with a 15cm Sandeel, this one suits the 20cm Savage Sandeel perfectly.

Thes are sold in Plain Lead (this version with no 3D eye) but we can powder coat them if required (contact us).

Sold in a pack of 4.

Additional images clearly show the finish quality of our jigs. Looking at other image of jig on offer, they have not been properly made, they have not bee cleaned up properly after they come out of the mould, basically crap. You will only receive quality product from us.

In Stock