Carp and Specialist Lead Moulds

We offer a very wide range of Carp Lead Moulds covering all aspects of Carp Fishing. Square Pears, Distance Leads, Dumpy Pears, Flat Pears, Inline moulds in Flat Pears, Square Pears, Dumpy and Distance. 

We offer a very wide range of Carp Lead Moulds covering all aspects of Carp Fishing. Square Pears, Distance Leads, Dumpy Pears, Flat Pears, Inline moulds in Flat Pears, Square Pears, Dumpy and Distance.We offer a very wide range of Carp Lead Moulds covering all aspects of Carp Fishing. Square Pears, Distance Leads, Dumpy Pears, Flat Pears, Inline moulds in Flat Pears, Square Pears, Dumpy and Distance. 

We also offer all the accessories required to make you leads, plastic coating in numerous colours, lead loops of varying sizes to suit your choice of mould, matt black Carp lead swivels, mould clamps etc. One stop shop for your requirements.

Inline Dumpy Pear Mould available in 2oz, 2.5oz, 3oz.  Supplied with a T bar pull pin and five plastic and inserts to make five leads.  Extremely fish friendly / safe leads which will ensure not fish are trailing leads in the event of a crack off.

Plastic Inline  inserts available in 100`s or 1000 packs.

See options for different sizes.

In Stock

Inline Flat Pear mould supplied with a T Bar pull pin.  Available in four sizes and supplied with five plastic and silicone inserts, enough to make five leads.  Supplied with full instructions.

 

  • See options for different sizes
  • Silicone and Plastic inserts available in 100`s or 1000 packs
  • Keep the mould faces clean, before use check for discolouration, if any build up can be seen, put each mould face in a vice and go over it gently with a wire brush. It will save you a lot of work cleaning off flashing.

Out of Stock

Inline Square Pear mould, supplied with a T Bar pull pin.  Each mould is supplied with five plastic inserts to make five leads.  Mould available in three sizes, see options for sizes.

Plastic Inserts available in 100`s and 1000`s.

In Stock

Four Cavity Distance Lead mould available in two sizes :

  • 1.5oz,2.25oz,3oz,4oz and also 2oz, 2.5oz,3.5oz,4,5oz.
  • Sold with 100 Chemically Blackened lead loops to fit this mould
  • See options for sizes

Out of Stock

This mould produces dumpy pears of 2oz,2.5oz,3oz,4oz.

  • Kits consists of Mould, 100 Blackened Loops, 100 Blackened Swivels and an 8oz pack of Camo Coating powder to get you started.  Enough to make 100 leads.
  • Mould also available on it`s own, see options
  • Enough to make 100 leads, that`s 34p each

Out of Stock

Two cavity mould producing 1.5oz + 2.5oz or 2oz +3oz.

  • Kit consists of a Square Pear Mould, 100 Blackened Loops, 100 Blackened Swivels + 8oz pack of Camo Powder.
  • Also available as mould only, see options

In Stock

New small Square Pear mould producing leads of 1.1oz + 1.75oz.  Available on its own or in kit form.

  • Kit comprises of mould, 100 loops, 100 swivels + 8oz of Camo Coat powder. Everything needed to make 100 leads start to finish. See options.

Out of Stock

Feature finding lead mould. Uses a long or short tail wire. 

Weight: 3oz. Also Available in four oz

Out of Stock

4 in 1 Flat Pear Mould. Use standard Black Lead Loops.

  • Makes 1.1oz, 1.5oz, 1.75oz, 2oz leads.
  • Perfect leads everytime, minimal flashing. Look like professionally made leads when plastic coated.
  • Available on it`s own or in a kit to make 100 leads, 100 loops, 100 swivels and 8oz Camo 4 powder coat. See options.

In Stock

This is a 4oz Inline Bottle Lead mould. The style has slipped in favour recently but is a personal favourite of mine. I Compo coat mine as they simply disappear on the bottom resembling mud, dead weed, rotting wood etc. Very stable in the bottom and also in flight.

In Stock

Brand new 3 cavity Dumpy Dice Mould. This mould produces three x 70g leads using loops and swivels.

  • Supplied with 100 Blackened Loops
  • Can be supplied as a kit including swivels and coating powder, see options 
  • The leads shown in the picture are not included with the mould

Out of Stock

Brand new 3 cavity Dumpy Dice Mould. This mould produces three x 80g leads using loops and swivels.

  • Supplied with 100 Blackened Loops
  • Can be supplied as a kit including swivels and coating powder, see options 
  • The leads shown in the picture are not included with the mould.
  • 60g (2oz approx) mould also available shortly

Out of Stock

Inline Dumpy Square Pear Mould available in 2oz, 2.5oz, 3oz.  Supplied with a T bar pull pin and five plastic and silicone inserts to make five leads (lead in picture not included). Extremely fish friendly / safe leads which will ensure not fish are trailing leads in the event of a crack off.

Plastic Inline  inserts available in 100`s or 1000 packs.

See options for different sizes.

Now available in 3.5oz, 4oz, 5oz as well

In Stock

New four cavity mould making 1.1oz, 1.5oz.2oz.2.5oz.

Mould supplied with 100 Matt Black Lead Loops. Also available in kit form, mould + 100 loops + 100 swivels + 8oz Powder Coat, see options

In Stock

Four Cvaity mould producing 4 x 2oz Zip Leads. Also available in 3oz, see options.

Supplied with 100 matt black lead loops 

Out of Stock

Four Cavity mould producing 4 x 3oz Zip Leads. These moulds are ideal for professional Lead makers as they allow high volumes of leads to be made.

Supplied with 100 matt black loops 

Available in 2oz and 3oz, see options

Out of Stock

These moulds produce two leads each time you pour making the job much quicker producing leads. Very popular, the leads are compact and dense. Coat using anyone of our Lead Coating powders to produce top quality leads.

Available in 2oz, 2.5oz, 3.5oz,4oz and 5oz see options

Out of Stock

Two cavity mould producing leads of 2.5oz + 4oz.

Also available in 2oz +3oz, 6oz, 8oz. See options

Favoured by many Barbel anglers as pastie can be compressed on the hole before casting. 

Out of Stock

Brilliant new distance lead mould. Twin cavity, a weight forward design for a longer cast and eliminate wobble during flight . It produces leads very similar to top brand name leads costing £1.50 to £1.80 each in the shops.

  • Available in 2oz, 2.5oz,3oz,3.5oz,4oz,5oz
  • Uses Standard Black Carp Lead Loops
  • See options for full size range

Out of Stock

This mould produces three 60g Dumpy Square Pear leads a time. Use Standard blackened loops in this mould.

  • Leads not included with the mould
  • Three leads at once, cuts down your moulding time

Out of Stock

Twin cavity 1oz watch lead mould, still the ultimate grip lead for Barbel anglers.

  • Will not roll, sticks to the river bed
  • Coat with Gravel coating powder for the perfect finish
  • Put a swivel on the loop prior to moulding

Out of Stock

2oz Twin cavity Watch Lead Mould. Original and still the best choice for Barbel anglers.

  • Will not roll, sticks to river bead
  • use Blackened Standard Carp Lead Loops
  • coat with Avon or Kent gravel for the perfect finish

In Stock

Five cavity mould producing leads up to 1.5oz approx.

 

  • Supplied with 50 Back lead Clips and rubbers 

Out of Stock

New mould producing 2oz Inline Tournement leads. This is a front loaded distance lead for those wanting to achieve maximum range.

Available in 2oz,2.5oz,3oz,3.5oz,4oz, see options. These moulds are becoming increasingly popular

Out of Stock

New Twin cavity Dumpy Square Pear moulds in 3.5oz, 4oz, 5oz.

 

  • See options for sizes 

In Stock

New Inline Dumpy Square Pear Moulds in larger sizes.

 

  • see options for sizes 
  • LEAD in picture NOT included
  • supplied with T Bar

Out of Stock

This two cavity mould produces 2 x 4oz Zip Leads / Distance Leads at a time.

  • Use small Black Lead Loops
  • Available in 4oz and 5oz, see options

Out of Stock

This four cavity mould produces Zip Leads weighing 2.5oz,3.5oz,4.5oz and 6oz.

  • For best results use Small Blackened Stainless Loops lead loops
  • Weights are approximate but based on leads moulded using one of these moulds
  • Only pour what sizes you require as each cavity is separate

Out of Stock

Here we have four single cavity Distance / Zip Lead moulds. These moulds ar not sand cast but injection moulded moulds and as a result are finished to a much higher standard.

  • For best results use Small Blackened lead loops
  • Loop slots may need to be filled a little to get a perfect seal around the cavity to eliminate and flashing
  • These moulds have the weight shifted further forward and as a result will cast further than other leads without any wobble during flight
  • Single cavity but VERY quick to use and produce a very high quality lead
  • Available in four sizes, see options 
  • weight sizes are approximate

In Stock

Inline Flat Pear mould supplied with a T Bar pull pin.  Available in four sizes and supplied with five plastic and silicone inserts, enough to make five leads.  Supplied with full instructions.

  • See options for different sizes
  • Silicone and Plastic inserts available in 100`s or 1000 packs
  • Use extra long one piece inserts

In Stock

This two cavity mould produces 2 x 3.5oz Zip Leads / Distance Leads at a time.

  • Use small Black Lead Loops / small stainless steel lead loops
  • Available in 3.5oz, 4oz, 4.5oz and 5oz, see options

Out of Stock

This two cavity mould produces 2 x 4.5oz Zip Leads / Distance Leads at a time.

  • Use small Black Lead Loops
  • Available in 3.5oz, 4oz, 4.5oz and 5oz, see options
  • Brilliant mould that produces leads requiring mionimal cleaning after pouring

Out of Stock

This mould produced two 1.1oz Dumpy Square Pear leads, ideal for close range carp fishing / match fishing.

  • Use small blackened or stainless steel lead loops
  • Brilliant little mould that produces leads for both Specialist and Match Anglers

Out of Stock

This mould produced two 1.5oz Dumpy Square Pear leads, ideal for close range carp fishing / match fishing.

  • Use small blackened or stainless steel lead loops

In Stock

This two cavity mould produces 2 x 4oz Zip Leads / Distance Leads at a time.

  • Use small Black Lead Loops
  • Available in 3.5oz,4oz, 4.5oz, 5oz and 6oz see options

Out of Stock

Twin Cavity Flat Pear Mould in 2oz. Use a Small Blackened Stainless Steel lead loop with this mould ensuring a clean moulding requiring minimum deburing. This mould makes two x 2oz flat pear leads per pouring.

  • Use Small Blackened Stainless Steel Loops
  • Nice cleaning moulding
  • supplied mould only

Out of Stock

1.5oz Twin Cavity Dumpy Pear Mould. Compact Dump Pear lead produced from this mould are clean and require minimal deburing when poured. Use the Small Blackened Stainless loops with this mould to ensure a clean pour.

  • Use Small Blackened Stainless Steel Loops
  • Supplied Mould Only
  • Available in 1.5oz, 2oz, 2.5oz, 3oz. Speed up your lead production by 100% !
  • See additional images for the full range of moulds

In Stock

Mould Clamp

Hold your mould together tightly and safely when pouring hot lead. These clamps are very quick and easy to use and make the entire process of lead making much easier and safer as they provide you with a firm grip on the mould, a handle which allows you to safely move the mould around and eliminate the need to tighten and undo threads on a G clamp.

Light weight and easy to open and close, quick and simple to clamp your mould closed.

Out of Stock

These moulds produce two leads each time you pour making the job much quicker producing leads. Very popular, the leads are compact and dense. Coat using anyone of our Lead Coating powders to produce top quality leads.

Available in 2oz, 2.5oz, 3.5oz,4oz and 5oz see options

Out of Stock

Inline Dumpy Square Pear Mould available in 1oz, 1.5oz,2oz, 2.5oz, 3oz, 3.5oz, 4oz and 5oz.  Supplied with a T bar pull pin and five plastic and silicone inserts to make five leads (lead in picture not included). Extremely fish friendly / safe leads which will ensure not fish are trailing leads in the event of a crack off.

Plastic Inline  inserts available in 100`s or 1000 packs.

See our Mould Clamps for fast and safe working

See options for different sizes.

Out of Stock

Inline Dumpy Square Pear Mould available in 1oz, 1.5oz,2oz, 2.5oz, 3oz, 3.5oz, 4oz and 5oz.  Supplied with a T bar pull pin and five plastic and silicone inserts to make five leads (lead in picture not included). Extremely fish friendly / safe leads which will ensure not fish are trailing leads in the event of a crack off.

Plastic Inline  inserts available in 100`s or 1000 packs.

See our Mould Clamps for fast and safe working

See options for different sizes.

In Stock

3.5oz Twin Cavity Dumpy Pear Mould. Compact Dump Pear lead produced from this mould are clean and require minimal deburing when poured. Use the Standard Blackened Stainless loops with this mould to ensure a clean pour.

  • Use Standard Blackened Loops (Small Blackened Stainless loops for 1oz)
  • Supplied Mould Only
  • Available in 1.5oz, 2oz, 2.5oz, 3oz, 3.5oz, 4oz. Speed up your lead production by 100% !
  • See our Mould Clamps, quick, safe and fast
  • See additional images for the full range of moulds
  • Brilliant range of moulds

In Stock

4oz Twin Cavity Dumpy Pear Mould. Compact Dump Pear lead produced from this mould are clean and require minimal deburing when poured. Use the Standard Blackened Stainless loops with this mould to ensure a clean pour.

  • Use Standard Blackened Loops
  • Supplied Mould Only
  • Available in 1.5oz, 2oz, 2.5oz, 3oz, 3.5oz, 4oz. Speed up your lead production by 100% !
  • See our Mould Clamps, quick, safe and fast
  • See additional images for the full range of moulds

Out of Stock

1.5oz Tournament Distance Carp Lead Mould. This is a new mould to the range and is a stunner. Perfectly shaped, used with light TC. rods it will cast like a bullet. 

Use the Standard Blackened Lead Loops with this mould for best results. It casts beautifully in the mould with minimal flashing.

For those anglers who fish for Tench and Carp withlighter tackle, this is the ideal mould to help you achieve that little extra distance on the cast.

In Stock

Inline Flat Pear mould supplied with a T Bar pull pin.  Available in seven sizes and supplied with five plastic and silicone inserts, enough to make five leads.  Supplied with full instructions.

  • See options for different sizes
  • Silicone and Plastic inserts available in 100`s or 1000 packs
  • Use extra long one piece inserts

In Stock

1oz Flat Pear Mould Twin Cavity. Use Small Blackened Stainless Steel Loops

Out of Stock

1.5oz Twin Cavity Flat Pear Mould. Use Small Blackened Stainless Steel Loops

Two leads per pouring, keep mould faces clean for minimal cleaning after pouring rpior to coating

In Stock

1oz Twin Cavity Dumpy Pear Mould. Use with Small Blackened Stainless Steel loops, this mould produces two leads at a time of the same size. 

Keep mould faces clean to avoid excessive flashing

In Stock

Dead Cow Mould producing 3oz, 4oz, 5oz strap on leads for fast water Barbel Fishing. Straps are nice and narrow and easy to fold. If a little to think, a few taps with a hammer can reduce the thickness of the strap.

Also available in 1.5oz,2oz,2.5oz, see options

Out of Stock

Inline Dumpy Pear Mould 3.5oz. Compact mould which produces perfect lead every time. Great lead for flat bottom lakes.

In Stock

Inline Flat Pear Mould 5oz, supplied with pull pin. Compact mould which produces perfect lead every time. There is very little flashing with these moulds but take a few minutes to clean the mould faces before use. Place the mould halves in a vice and brush with a wire brush removing any discolouration from each face.

In Stock

New mould to complete the range of Pastie Grippers. Availble from 2oz up to 8oz

Out of Stock

This two cavity mould produces 2 x 4oz Zip Leads / Distance Leads at a time.

  • Use small Black Lead Loops
  • Available in 3.5oz,4oz, 4.5oz, 5oz and 6oz see options

Out of Stock

Feature finding lead mould. Uses a long or short tail wire. Weight: 3oz. Also Available in four ounzes. To buy these leads in the shop is crazy money, for the price of the mould and 100 long tail wires, you can make up 100 of them @ roughly 30p each !

In Stock

This mould produces four x 1.2oz Zip Leads at a time. These leads for those who prefer to use a smaller lead, the cast extremely well and finish very nicely.

When moulding, use our Small Blackened Stainless Steel Lead Loops to minimise flashing.

Brilliant little mould for those who want to produce a lot of leads quickly.

You might ask why 1.2oz weight, leads by law have to be 1.1oz minimum weight for use in fresh water, sand casting moulds makes it very difficult to be exact hence 0.1oz out but what the heck, still a brilliant little mould.

Out of Stock

This mould produces four x 1.5oz Zip Leads at a time. These leads for those who prefer to use a smaller lead, the cast extremely well and finish very nicely.

When moulding, use our Small Blackened Stainless Steel Lead Loops to minimise flashing.

Brilliant little mould for those who want to produce a lot of leads quickly.

Out of Stock

This two cavity Zip Lead Mould two x 2.5oz Zip Leads at a time. Easy to use and lead come out with minimal flashing.

Use our Small Blackened Stainless Steel Loops with this mould for best results.

See the tip below to ensure you make the best leads you can with minimal hasle. 

In Stock

Here is the new 6oz Inline Flat Pear Mould. Supplied with pull pin, this new heavy weight Inline Flat Pear mould will produce leads that will catch a lot of fish as they will not move these leads without getting hooked. Carp and Barbel anglers will put this mould to good use.

In Stock

This mould produces a 6oz Flat Pear using a standard blackened lead loop. Good shape, ideal for Carp and Barbel anglers alike.

In Stock

This single cavity mould produces 8oz Flat Pear leads. Wonderful mould, produces perfect leads every time.

Use standard Black Lead Loop.

Small tip: before you start moulding leads, work a little Blue Tac into the lead loop slots on one half of the mould. This ensures a perfect seal around the lead loop when pouring and also ensures the lead loop does not move during pouring. When I say a little I mean a little. Do not put in so much that the mould faces do not close properly but a smear of it almost and push it into the slots with a small screw driver.

Out of Stock